Extreme Pressure Multipurpose Grease
1kg
5kg
20kg
180kg
Suitable for bearings, bushings, rack and pinion, and gears.
Ideal for universal joints, kingpins, guides, and chains.
Used in electric motors, pumps, EOT cranes, forklifts, and other greasing points.
Multipurpose application reducing grease inventory.
Extends re-lubrication intervals and reduces downtime.
Enhances bearing life by minimizing wear and tear.
Offers strong rust and corrosion protection.
| Characteristics | Test Method | Typical Values |
|---|---|---|
| Appearance | - | Smooth Homogenous Grease |
| Base | - | Mineral Oil, Lithium |
| Colour | - | Beige to Pale Yellow |
| Drop Point, °C | ASTM D-566 | 180 (min) |
| Consistency (NLGI) | - | # 2 |
| Worked Penetration | ASTM D-217 | 265 – 295 |
| Base Oil Viscosity, cSt (40°C) | ASTM D-445 | 220 |
| 4 Ball Weld Load, kg | ASTM D-2596 | 315 (min) |
| Temperature Range | - | -20°C to 130°C |
In the steel industry, particularly in cold rolling operations, roll neck bearings operate under some of the most demanding lubrication conditions in ...
Case Study | March 01, 2025
In commercial vehicle braking systems, the slack adjuster plays a critical role in maintaining optimal brake shoe-to-drum clearance. Installed between...
Case Study | March 01, 2025
In modern engineering applications, BLDC geared motors are widely used where precise speed control, compact design and high energy efficiency are crit...
Case Study | March 01, 2025
Statistical surveying predicts that the electric wire and cable market in India will grow consistently in future. The wire and cable industry analysis...
Case Study | October 30, 2025
Over 75% of the mechanical power harnessed by industries is due to motors that bank upon– good speed regulation and operating characteristics. D...
Case Study | October 24, 2025
The cement industry is the building block of a nation's growth. Infrastructure growth leads to India's growth has resulted in India being the 2nd larg...
Case Study | October 18, 2025
For a leading trans-national auto component Engineering establishment, it is important that the automotive components produced by them result in 100% ...
Case Study | October 18, 2025
